Modified starch, retarder, paper pulp, water reducing agent, water is quantitatively measured and put into a hydraulic pulper and stirred into a raw material slurry, which is then pumped into a slurry reserve tank for use;
Foaming agent and water into the foaming agent according to the proportion of preparation cans evenly, pumped into the foam agent reserve tank (with heating device to keep more than 35 ℃) reserve;
Accelerator and gypsum powder raw materials into the hopper through the upgrading of transport equipment reserve;
Part II: Ingredients
The slurry in the slurry storage tank is pumped into the mixer using the metering pump. After the foaming agent uses the dynamic foaming device to enter the mixer, the coagulant and the gypsum powder will be measured by automatic metering belt, then enter into the mixer. The admixture was mixed in a blender to form a qualified gypsum slurry.