1, the plaster and water, as well as a variety of additional ingredients, respectively, by the automatic measurement, automatic conveyor system into the mixer, mixing into a gypsum slurry, and spread evenly in the continuous forward movement of the paper.
2, in the continuous advance at the same time through the vibration, the slurry gradually spread uniform cloth, followed by extrusion molding machine and the upper and lower face paper compound, through the extrusion molding paste is completely covered upper and lower face paper and squeeze into Continuous sheet of gypsum board.
3, the plate in the molding process of running through the plastic, natural solidification, such as automatic cut off has been gradually formed wet solid gypsum board, the ceiling production line through the wet-process control system arrangement, through the roller, belt conveyor and flap, Drying room.
4, the board in the drying room under the strict control of each temperature zone, and into the different temperature of the hot air, wet water evaporation board, the starch reaction will be board and paper surface bonding, dry plaster board from the drying room stand out.
5, and then again flap and film (front to the inside), the cut-length saw the board will cut into a certain size of the finished plate.
6, the final transmission to the automatic header and automatic palletizing, palletizing finished forklift sent to the finished product storage.